Restart Kerio Control using the /etc/boxinit.d/60winroute restart command.

Modify the Interfaces_v2 or TrafficRules_v2 content as specified in Method 1.

Open the ControlBackup folder and copy the content of winroute.cfg and paste it into the new file created ( ).

Obtain a backup file saved from MyKerio or FTP server (or if you have it saved locally).

Create a new file named in /var/winroute:.Save the file and restart Kerio Control by running the following command:.(Optional) If you need to change a particular traffic rule, edit the following section:.Replace IPAddress, Mask, and Gateway if needed.Find the necessary interface and modify the following variables:.You can use the grep command to locate the line number and the nano editor to open the file. Locate the Interfaces_v2 section inside winroute.cfg file.Make the system read/write by executing the below commands:.Refer to Connecting to Kerio Hardware Appliances with Serial Console for more information.

You need direct access to the Kerio Control box using a serial console. This article explains how to modify the Kerio Control configuration via serial console using two methods. Inability to access Webadmin GUI settings can be fixed by using a serial cable shipped with most hardware boxes (except NG100/NG100W/NG110 models). This happens due to configuration mistakes or hardware issues, mostly when migrating from another box. In some cases, the factory-reset of the box does not help in resolving network misconfiguration caused by broken network access.

Download kerio archive